The engine is in place but after we put the in place we realized that the engine and transmission were to far back. For the driveshafts to line up with the differentials the engine needed to be moved 1 1/2 inches forward. We flipped the transmission mount which gained 1 inch forward. To gain the remainder 1/2 inch we are going to modify the engine mounts. With the engine and transmission forward the transmission cross-member fits in place. Also the engine is to close to the driver side the the vehicle so we are going to move it 2 inches closer to the passenger side. The engine mounts well have to be cut and welded to fit in place. When the engine in moved forward it will no longer be hitting the firewall. This process will take a long time and will require lots of problem solving.
