we decide to Replace it. Not thing was hard to me. New rotor and New shoes.
After we done the Brakes, we found the Bearings need to clean too. I take out the bearing on the axis inside the whole space was full with the grease. I take out and wash it. than I put the new and clean grease in it.
Use the Grease packing tool to filed the grease in bearing with out any spce in the bearing in it. And Remove the old damaged oil seal reinstall a New one and just hammer in carefully bake.
Use the Grease packing tool to filed the grease in bearing with out any spce in the bearing in it. And Remove the old damaged oil seal reinstall a New one and just hammer in carefully bake.
