- Remove /reinstall the front grill
- Remove /reinstall the Front Light
- Cut the Front engine Bar
- Remove Front & rear drive shaft
- Remove fuel tank & disconnect fuel line
- Disconnect transmission connectors & linkages
- Remove transfer case shifter
- Remove the complete Exhaust system (the bolt of the Exhaust are very tight So we used OXY/ACET torch)
- Disconnect the starter motor wire & alternator wire
- All Four Wheels Disk Brakes roter and shose Replace
- Fix front wheel join point bearing
- Replace rubber cover For the drive axle
- Replace the Rear Drum brake
- Remove the Oil pan and Fix the damage point and Reglue it back on
- Making a New Braket for oil filter
- Recut the power steering tube
- Connect alot tube and wire some with clamped
- Rebuild the Front engine Bar bracket
- Replace some Broken light bulb
- Reinstall the Fuel tank and Reposition the fuel pipe
- making new exhaust tip
- Reinstall the Shift nob
- Reinstall the speed senser for transmission
- ReInstall the Hood
- Reconnect the Wire the make backup light work
- Find the drive indcator light make it work
- Reconnect the wire For Let the A/C working properly
- cleaning the air intake
